Top 10 Woodworking Tips for Beginners
Using drill presses and sander may not only be a part of your hobby but it can be used for the good professional purpose as well. If you are serious about learning woodworking, then you need a proper guide and woodworking tips for beginners and professionals to do so.
While my beginning periods in learning drilling and woodcraft I was looking for woodworking tips and techniques in different forums and came out with excellent knowledge. And with the experience, can now tell the best way to learn woodworking easily.
- 1 Top 10 Woodworking Tips and Techniques for Beginners
- 1.1 Tips 1: Make Your Personal Reusable Sanding Blocks
- 1.2 Tips 2: Crosscutting Stop Block
- 1.3 Tips 3: Stair Gauges
- 1.4 Tips 4: Use Tape to Catch Surplus Glue
- 1.5 Tips 5: Use Drafting Square to be Accurate
- 1.6 Tips 6: Use Hot Glue to Attach Smaller Pieces
- 1.7 Tips 7: Heat or Cool to Un-Stick the Object
- 1.8 Tips 8: Use Duct Tape for Marking a Level Spot
- 1.9 Tips 9: Install Blade so Teeth Face Forward
- 1.10 Tips 10: Get the Most Out of Best Beginning Woodworking Books
- 1.11 Conclusion
Top 10 Woodworking Tips and Techniques for Beginners
We have discussed and asked some of the professionals in woodworking for their tips. The advises and tips will make you work faster and in an easier way. Let’s find out how.
Tips 1: Make Your Personal Reusable Sanding Blocks
In this content, we will teach you to make your personal reusable sanding block. Take ¾ inch scrap plywood and cut six blocks from there for the sandpapers you usually use. Cut them into 2-1/2 x ¾ inches. Use spray adhesive on each block and a square of a cork slab. This is one of the major parts of woodworking projects beginners level.
Attach a block with the cork and cut the cork according to that with a utility knife. Therefore, use spray adhesive on a piece of sandpaper and attach it to a cork block. Do same with other cork blocks also. Cut the sandpaper according to the cork block and label all the blocks.
Tips 2: Crosscutting Stop Block
I strongly suggest you set the cutting length of a block attached to the fence while crosscutting on a table saw. It is very dangerous to use the fence directly. Avoid using the fence directly to eliminate the chance of a board jump back at you.
You should clinch a wood block to the fence before you clinch the blade. As a result, the edge of the board will be free of the fence at time of cutting and after cutting also. You can set the fence scale to your desired thickness and work with that. It is as simple as that.
Tips 3: Stair Gauges
Stair gauges are versatile and inexpensive. You will get these at any hardware shops. It will cost you less than 5 dollars. Use the stair gauges to clamp the framing square in place. It won’t let the framing square to slide around at the time of cutting.
The video will show how to properly use a Stair Gauges. Using this woodworking tips YouTube will let you easily understand the process of “Stair Gauges”.
Stair gauges are commonly used for adjusting stair jacks. Clinch the stair gauges to the framing square to equal the rise and stair jack drive and then mark the nicks. Put the stair gauges on the same tongue of framing square. It works great as a crosscut guide.
Tips 4: Use Tape to Catch Surplus Glue
Use tape on the joints then cut onward with a sharp blade. Isolate the parts and put glue to attach them again. It will prevent blotches by the dripping glue along the joints. The tape will catch the dripping glues and thus doesn’t let the wood stain by the dripping glue. Remove the tape before the glue dries.
If you read our previous article on woodworking tips then you know what we are doing here. Let’s move on to the 5 woodworking tips we’ve given below.
Tips 5: Use Drafting Square to be Accurate
The options are limited to making an accurate 2-3ft square. Also, drywall square won’t do an accurate job for you. It will be inaccurate and clumsy with a drywall square. Carpenter’s square or framing square has the trouble of hooking onto the end of the workpiece.
Drafting square does the best accurate job for you. You can get drafting square at art supply store. It will cost you 5 dollars or a little more.
Tips 6: Use Hot Glue to Attach Smaller Pieces
Hot glue works better than clamps for attaching small pieces. Often you may have to cut, shape, sand or finish small objects. Use hot glue on them instead of a clamp. Hot glue holds small objects superior to clamps.
Clamps can never hold the small objects like the hot glue. Try to loosen the piece with a putty knife when you have finished the job. Do not use too much pressure to avoid breaking the piece or abolish the wood.
Tips 7: Heat or Cool to Un-Stick the Object
The hot glue grip on small objects is really strong. There are two ways of undoing the grip. The ways are cold and heat. Put the workpiece into a freezer for a couple of hours. A little force should do the work on the frozen glue.
If it fails then try something like a hair dryer to soothe the glue. If it still fails then use a heat gun to warm slowly to avoid blistering the wood or hurting the finish.
Tips 8: Use Duct Tape for Marking a Level Spot
Do you own a mobile base for your woodworks? If you do, it is definitely made your life easy. It is easy to bring out and put away. Make a level spot using duct tape. Use duct tape to mark the wheel positions.
Finish the remaining job by finding the level spot you’ve marked on the floor. This process is also very useful for sawing boards with no obstruction.
Tips 9: Install Blade so Teeth Face Forward
Hacksaw is an essential element for woodworking. You can install blade on a hacksaw so that the teeth face forward. The saws are designed to cut by a backward stroke but the blade will cut by the forward stroke.
Install the blade properly. The blade heats up and bends due to excess work. You need to tighten the blade when that happens.
Tips 10: Get the Most Out of Best Beginning Woodworking Books
Check out the books and online projects of woodworking for getting different ideas and knowledge. Search basic woodworking pdf, projects etc. Also, there are many courses to learn woodworking online free and in the paid way. Check out them with woodworking books.
Best Beginning Woodworking Books
- Woodworking Basics: ebook and paperback
by Peter Korn
- Projects for your Shop
by Matthew Teague
- Getting Started in Woodworking: ebook and paperback
by Aimé Ontario Fraser
- Furniture You Can Build: ebook and paperback
by Joseph Hurst-Wajszczuk
- Your First Workshop: ebook and paperback
by Aimé Ontario Fraser
- Taunton’s Complete Illustrated Guide to Woodworking
by Lonnie Bird, Jeff Jewitt, Thomas Lie-Nielsen, Andy Rae, and Gary Rogowski
- Four Book Getting Started in Woodworking Set
Includes: Projects for Your Shop & Your First Workshop Set
- Tage Frid Teaches Woodworking: by Tage Frid
- . Handplane Essentials by Christopher Schwarz
- The Fine Art of Marquetry by Craig Vandall Stevens
- Woodworkers’ Guide to Veneering & Inlay by Jonathan Benson
I hope this in-depth Woodworking Tips for Beginners and professional will give you easy and comfortable insight into drilling with accessories and working woods. With vast experience and knowledge on this subject, I have only suggested the easiest woodworking tips and techniques that are simple to follow.